Double wall tanks

The double wall tanks are manufactured with first choice material and S235JJR carbon steel or 304 or 316L stainless steel, externally welded with submerged arc, internally with continuous wire, designed and manufactured in compliance with the regulations: EN 12285-1 – Ministerial Decree 246 of 29/11/2002 for underground and above-ground areas in accordance with: EN 12285-2

serbatoi_interro

Technical features:
Capacity from 0.5 MC to 200 MC.
Reinforcement rings according to capacity and size.
Manhole with connections and sizing according to the service of the tank.
Flanged anti-leakage half-well 1200 × 1200 h150 mm. (to be completed according to use).
Lifting eyebolts.
Ground connection.
Underground wedges where required.
Support saddles according to EN 12285-2 (above ground).
Compartment dividers where required with various volume capacities.
External coatings in glass fibre reinforced resin, thick 2,5 mm and up to 4,5 mm on request and two-component epoxy tar.
External painting with anti-rust primer and two-component finishing enamel (for above ground surfaces).
Internal coatings with vegetable oil, two-component epoxy paint and epoxy resins.

User:
Service stations
AdBlue (internal to 304 or 316L)
Commercial fuel depots
Autotraction for private or agricultural use
Heating
Power generators
New and exhausted
oil

On request:
sheet sandblasting before each treatment.
external walls with patented system in resin reinforced with fiberglass thickness of 4,5 mm.
LAG leak detection system. 14 ER liquid (cavity filling with water with 20% vegetable glycol).
Eurovac leak detection system under depression.

CHEMICAL PRODUCTS

Commercial chemical deposits.
Industrial processing.
Aviation.
Polluting liquids in general.

WATER TREATMENT

Use with waters.
Industrial processing water recovery.
Waste water treatment.
Waters with chemical residues.

WELLS OF THE K1 ITALIA SERIES

Anti-spill well for driveway area made up of two overlapping sections, complete with one-piece gasket and nuts and bolts. Made of hot-galvanized S235JR sheet steel, aluminium top cover and brass flame arrestor.

WELLS OF THE K3R SERIES

Anti-spill well for green area formed by a part fixed to the half-well of the tank with flange, one-piece gasket and bolts made of hot-galvanized S235JR sheet steel. Height adjustable and tilting part complete with pedestrian grid with pedestrian aluminium cover, handle and lockable closure.

TANKS FOR ROAD,
CIVIL AND INDUSTRIAL INSTALLATIONS