Single wall tanks

The single wall tanks are manufactured with first choice material and S235JJR carbon steel or 304 or 316L stainless steel, externally welded with submerged arc, internally with continuous wire, designed and manufactured in compliance with the below regulations: EN 12285-1 – Ministerial Decree 246 of 29/11/2002 for underground and above-ground areas in accordance with: EN 12285-2.

Technical features:
Capacity from 0.5 MC to 200 MC.
Reinforcement rings according to capacity and size.
Manhole with connections and sizing according to the service of the tank.
Flanged anti-leakage half-well 1200 × 1200 h150 mm. (to be completed according to use).
Lifting eyebolts.
Ground connection.
Underground wedges where required.
Support saddles according to EN 12285-2 (above ground).
Compartment dividers where required with various volume capacities.
External coatings in glass fibre reinforced resin, thick 2,5 mm and up to 4,5 mm on request and two-component epoxy tar.
External painting with anti-rust primer and two-component finishing enamel (for above ground surfaces).
Internal coatings with vegetable oil, two-component epoxy paint and epoxy resins.

User:
Heating for private use.
Firefighting.
Rainwater recovery.
Non-polluting liquid storage.

On request:
sheet sandblasting before each treatment.
external walls with patented system in resin reinforced with fiberglass thickness of 4,5mm.

FIRE FIGHTING TANKS

Single wall tanks for cylindrical water reserve capacity up to 200 cubic meters made of first choice S235JR carbon steel welded externally with submerged arc, internally with continuous wire, designed and manufactured in compliance with the regulations: EN 12285-1 for underground and above ground areas according to the below regulations: EN 12285-2

Above ground solution with complete horizontal or vertical axis:
650x650h300 mm well with lockable lid, fall protection grid and complete with:
Drain pipe.
4” overflow connection.
Return connection.
Lifting eyebolts.
Support saddles according to EN 12285-2.
Suction and technical connections as per your requests.

Internal coating according to your choice:
Vegetable-Two-component epocatramine-Two-component epoxy resin.
Upon request after sandblasting.
External treatment with base coat and finishing enamel with RAL according to your choice.

Complete integrated systems with fire-fighting unit IN COMPLIANCE WITH EN 1285 UNI 10779 UNI 11292 to be combined with fire-fighting tanks:
Complete box system to be combined with above-ground or underground tank
complete fire-fighting unit to be installed on the technical compartment of the tank.

Underground solution with horizontal axis:
650x650h300mm well with lockable lid, fall protection grid and complete with:
Drain pipe.
4” overflow connection.
Return connection.
Lifting eyebolts.
Reinforcement rings for driveway where required.
Suction connections for pumps and technicians as per your requests.

Internal coating according to your choice:
Vegetable-Two-component epocatramine-Two-component epoxy resin.

External treatment:
In fiberglass-reinforced resin, 2.5 cm thick (10-year warranty)
Epocatramine.

WELLS OF THE K1 ITALIA SERIES

Anti-spill well for driveway area made up of two overlapping sections, complete with one-piece gasket and nuts and bolts. Made of hot-galvanized S235JR sheet steel, aluminium top cover and brass flame arrestor.

WELLS OF THE K3R SERIES

Anti-spill well for green area formed by a part fixed to the half-well of the tank with flange, one-piece gasket and bolts made of hot-galvanized S235JR sheet steel. Height adjustable and tilting part complete with pedestrian grid with pedestrian aluminium cover, handle and lockable closure.

TANKS FOR ROAD,
CIVIL AND INDUSTRIAL INSTALLATIONS